LAWA Construction Inspector Electrical Job at Pacific Pros, Los Angeles, CA

KzQ1Z1lXdnZJb0xIajdsb3BFbXE3ZkVRdHc9PQ==
  • Pacific Pros
  • Los Angeles, CA

Job Description

Benefits:

Paid Holidays

401(k)

401(k) matching

Dental insurance

Health insurance

Paid time off

Vision insurance

Pacific Pros is seeking Construction Inspector for Construction Projects to be a representative for Los Angeles World Airport (LAWA).

Work Location: LAWA has required the candidates be local for this position.

Region: Los Angeles, CA

Status: Full-time on-site.

Opening: Summer 2025, Immediate

Working Hours: TBD, typical dayshift is 6:00am 2:30pm or 5:00am 1:30pm M-F; night shift is 10:00pm 6:30am Sun

Position Description Summary Serve as Owner's representative. The Electrical / IT Inspector will support LAWAs Quality Assurance & Construction Inspection Division across multiple projects within LAWAs Capital Improvement Program.

*Candidates must possess a current ICC certification as Commercial Electrical Inspector to apply.

*Successfully hired Candidates must provide Proof of NFPA 70E standards training within the last 3 years and Proof of Cal-OSHA 30 hr. training within the last 4 years, prior to assignment

*Successfully hired candidates must have LAWA SIDA badge prior to official start.

*Must be able to work any assigned shift - day, swing, or night - as required to meet the contractors construction schedule.

Description of Duties for this position

The duties for this position include, but are not limited to, the following:

Electrical/IT inspection staff shall have a thorough knowledge of the methods, materials and techniques of the electrical/IT trade;

the ability to diagnose violations and hazards in new and existing electrical/IT installations and take a proactive approach during construction;

have a general understanding of low voltage systems including fire/life safety and information technology;

have the ability to read and interpret contract documents, electrical codes, applicable standards.

Electrical/IT Inspectors must have the ability to set priorities, the ability to make decisions and work effectively with minimal supervision,

the ability to deal tactfully and effectively with LAWA stakeholders, contractors, construction workers, the public and must conduct themselves in a professional manner at all times.

Professional Experience Level/Minimum Qualifications

Electrical/IT inspection staff shall have 3 years or more experience performing electrical/IT inspections for Building Construction.

Current ICC Certification as a Commercial Electrical Inspector

Proof of NFPA 70E standards training within the last 3 years

Proof of Cal-OSHA 30 hr. training within the last 4 years

Training & knowledge of NFPA -70, 70E, & 72.

Fall protection and harness training.

Preferred Qualifications and Experience

Experience at the journey-level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings.

Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects.

Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials.

Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards.

Must be open to learning the prescriptive items required by the agency.

A strong understanding of diverse code requirements.

Excellent communication and time management skills.

Essential Job Duties

Conduct comprehensive daily inspections of electrical and IT systems across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders.

Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner.

Verify contractor compliance with local and national electrical codes (e.g., NEC, NFPA 70, 70E, 72) and LAWA-specific standards.

Track and document time-and-material work, field changes, and job quantities

Assist in validating contractor progress payment requests based on an approved schedule of values.

Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed.

Perform inspections of electrical installations including, but not limited to:

Underground utilities and duct banks

High-voltage switchgear and electrical panels

Conduit racks, conductors, and grounding systems

Interior and exterior lighting systems

Fire life safety systems including smoke/heat detectors and FM-200 suppression systems

Electrical shutdowns, lockout/tagout procedures, and breaker coordination

Inspect IT infrastructure installations such as:

Low-voltage systems (voice/data, security, access control)

Door card readers, security cameras, and public address (P.A.) systems

Communication cabling and equipment rooms

Hardware/Software Knowledge

Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Excel, Word, PM Web, Adobe Pro, Bluebeam, etc.).

Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision.

Required Qualifications

Electrical/IT inspection staff shall have at 3 years or more of experience performing electrical/IT inspections; For task on the Airfield, 3 years or more of experience with airfield lighting is required.

Proven expertise in the installation and inspection of sewer and storm drainsystems, utility infrastructure, and traffic control measures.

Strong working knowledge of City of Los Angeles and County of Los AngelesStandards.

Ability to work effectively in a team-oriented environment.

Requires a detail-oriented professional with extensive field experience and a strong commitment to safety and compliance.

US Employment Authorization without needing sponsorship

See Education/Training requirements

Excellent written and oral communication skills

A valid Drivers License and compliance with PACIFICs Vehicle Policy

Proficiency with common Microsoft Office Applications (Word, Excel, PowerPoint and Outlook), SharePoint and Adobe Acrobat (PDF files)

3+ References from Clients

Minimum Education/Training

High school diploma (or equivalent)

Higher education level is preferred.

For task on the Airfield, 3 years or more of experience with airfield lighting is required.

Registration/Certification

OSHA 30 (prior to assignment); valid certificates obtained within the past 4 years is acceptable.

Current ICC Certification as a Commercial Electrical Inspector;

Proof of NFPE-70E standards. Completion of training must have been achieved within the last 3 years

Element-Specific Requirements/Notes

May assume other duties as required/needed.

May be required to work various shifts, including day, swing, and night.

Shall be open to work modified schedules, including nights and weekends, as dictated by the contractors' work activities and accelerated project schedules.

Availability to work overtime as required to meet project deadlines and ensure timely completion of tasks is preferred.

LAWA has required the candidates be local and available fully on-site for this field position.

Compensation

Prevailing Wage Position

#J-18808-Ljbffr

Job Tags

Full time, Contract work, For contractors, Summer work, Work at office, Local area, Immediate start, Shift work, Day shift,

Similar Jobs

TechDigital Group

Build Engineer Job at TechDigital Group

 ...Minimum 12+ Years of Experience Required. Job Description: Seeking a Software Build Engineer to design, implement, and test the build system for the complete software stack for automotive infotainment platform software. Role Responsibilities: Build... 

US Foods, Inc.

Night Warehouse Selector Job at US Foods, Inc.

 ...Job Description JOIN OUR WAREHOUSE TEAM! Ready to build a career with a company thats leading the foodservice industry? We...  ...8+ hour night shifts, typically Sunday Thursday. At times weekends and holidays will required Recent experience (within past 6... 

YTC America Inc.

Research Technician - Molecular Biology Job at YTC America Inc.

 ...genetic analysis and data interpretation.Requirements The candidate should have a bachelors degree in biology, microbiology, biotechnology, bioengineering, chemistry, or biochemistry.The successful candidate will be analytical and methodical in problem-solving, proactive... 

Halcyon Nurse Staffing

Local Contract Pharmacy Technician Job at Halcyon Nurse Staffing

 ...Description Halcyon Nurse Staffing is seeking a local contract Pharmacy Technician for a local contract job in Honolulu, Hawaii. Job...  ...$1,440.00 Position Requirements Minimum 2+ years of experience as a Pharmacy Technician in a hospital or acute care setting... 

HireTalent - Staffing & Recruiting Firm

Print Operator (3D) Job at HireTalent - Staffing & Recruiting Firm

 ...Title: Concept Creator/3D Printer Operator. Location: Beaverton, OR Duration: 9+ Months contract Job Description: Summary...  ...Creator/3D Printer Operator. The Concept Creator/3D Printing Operator Additive Apparel is a key contributor in merging apparel...